Easy Installation Video

Click Here to Order Healthy Shelf® Today

Click Here to Order M-Fold Refill Towels

Step 1: Position the shelf top flat against the wall in the desired location. Be sure that the smaller circle of the “keyhole” opening is on the top facing up toward the ceiling with the larger circle at the bottom. Lay a pencil or sharp punch across the keyhole to mark the screw locations on the wall. If the hole is on a stud, first use the appropriate drill bit to drill small pilot holes at the center of the screw location marks.

Step 2: For drywall, insert one of the plastic anchors from the included hardware into the hole at the pencil mark until the anchor is flush with the wall. If needed, tap lightly with a hammer. If hanging on a stud, the anchors will not be needed.

Step 3: Using a screwdriver, tighten one of the included screws into the anchor (drywall) or into the pilot hole drilled into a stud. The head of the screw should not be flush but should protrude enough for the bottom hole of the keyhole mount in the shelf to fit snugly over the screw. The Healthy Shelf can then be gently pulled downward to secure the mount. The screw may need some adjusting to ensure a proper fit.

Step 4: Remove the top of the Healthy Shelf, place 75-100 Multi-Fold (M-Fold) towels in the dispenser and replace the lid. For smooth dispensing, do not overfill.

Notes:
1. Basic hardware is included; however, you should be sure to use hardware that is appropriate for your wall type. When in doubt, consult a professional.
2. Properly installed, Healthy Shelf® will hold up to 10 lbs. on a closed lid.